|
What Are Our Products Made Of?
Alabastrite
Alabastrite is our product line name for polyresin items.
Alabastrite is a stone-based material which can be intricately molded
producing great detail, and will allow paint to adhere. These items
may be cleaned by dusting, however, they should not be washed with
water as they are painted with water soluble paints.
Return To Top
Bone China
White clay with bone ash added. Bone ash content must be at least
25% by U. S. guidelines. Fired at 1800 degrees. The translucent material is finished with
a glaze or underglaze (matte). Lighter, stronger, more expensive than porcelain.
Return To Top
Porcelain
Fine ground white clay, molded and fired in an oven for eight hours
at 1200 degrees. Finished with a glazed, underglazed, or "bisque" finish.
Glazing produces a high gloss; underglaze produces a matte finish. Bisque is a matte
finish without glaze. After finishing, the item is "cooked" for six hours at 800
degrees.
Return To Top
Jade Porcelain
Jade porcelain is a type of porcelain made with a finer clay.
Usually no glaze or only a colorless glaze will be applied at the final firing to show off
the very smooth surface and to preserve the translucency. Example: 27112. Jade Porcelain
is used for night lights because of its high degree of translucency when lit.
Return To Top
Stoneware
White clay with fine ground stone. Working with stoneware
demands great expertise, and is in fact becoming a lost art. Stoneware is safe to use in
microwave and conventional ovens.
Return To Top
Patchwork
Items
Unique fabric or paper prints are applied to the surface of
porcelain, dolomite or polyresin items. After application, 12 layers of lacquer are
added and the item is hand polished to a high gloss between each layer.
Return To Top
Cubic Zircon
The most successful simulated diamond. Properties such as
refraction, hardness, and specific gravity are remarkably similar to diamonds. Example:
27432. Cubic zirconia are very hard to distinguish from diamonds; sometimes a jewelers
loop will be needed to see the difference.
Return To Top
Diamond
Extremely hard, highly refractive colorless or white crystalline of
carbon. Diamonds, like all gemstones, are judged in terms of Carats, or weight (different
from Karats, as in gold purity).
Return To Top
Gold
The ultimate precious metal. Virtually indestructible, amazingly
malleable, doesn't rust or tarnish. Graded by purity; in the U.S. a scale of 24 is used,
so 24 Karats (24K) is 100% pure. 18K is 18 parts gold and 6 parts alloy (other
metals), and so on. 10K is the legal minimum for Karat-graded gold. The word "Plumb" indicates
the exact purity of the piece.
Return To Top
Gemstones
Rubies, sapphires, emeralds and amethysts, often treasured as
birthstones, fall under the category of gemstones. (Birthstones are listed in the back
of your WOP catalog.) Gemstones are priced and graded by Carat weight.
Return To Top
Pearl
A smooth, lustrous, variously-colored deposit formed around a grain
of sand in the shell of a certain mollusk. Pearls may be formed naturally or "cultured"
through an artificial implanting process.
Return To Top
Sterling Silver
To qualify as "sterling" a given piece must be composed of
a least 92.5% pure silver.
Return To Top
Hong Tze
To closely emulate a special stone found in China which is known
for its deep red color, these items are created using an alabastrite polyresin. Hong
Tze pieces are highly polished, further bringing out the intense, deep red color.
Return To Top
Frosted Acrylic
Acrylic items are given the French Lilac process, (used on glass),
to achieve the distinctive frosted look. Example: 27205. The drama of frosted glass
without the weight.
Return To Top
Gypsum
Gypsum is a white mineral which is usually used to make Plaster
of Paris.
Return To Top
Dolomite
A magnesia-rich, sedimentary rock resembling limestone, dolomite
is either gray, pink or white in color.
Return To Top
|